XIWEN / Products
Product details
Mineral materials for considered surfaces.

Finish
Kunde 145# Marble Mineral * Fireproof & Impermeable * Inorganic Mineral Mortar
- Product summary
- Kunde 145# Marble Mineral * Fireproof & Impermeable * Inorganic Mineral Mortar
- Product code
- SM-003
Tell us your substrate and project needs so we can help confirm the suitable system.
Product Introduction: Liquid inorganic coating is a type of inorganic mineral coating that contains no organic solvents or water. Compared with traditional organic coatings, inorganic coatings have higher weather resistance, chemical corrosion resistance and stain resistance, as well as better adhesion and hiding power.
Color finish construction can be carried out by roller coating or spraying on the leveled wall surface.
This material is compatible with thin plaster mortar, inorganic mineral mortar, and Moon White layer material, and can be used for both indoor and outdoor scenarios. When constructed in combination with skin-feel materials, it can create the artistic finish effect of the Taormina Luxury Leather Series.
Main ingredients: Inorganic minerals account for ≥99%.
Main performance parameters:
- Impact resistance: 10cm
- Water resistance (500h): No discoloration or loss of gloss of the paint film, no abnormal phenomena such as blistering, rusting, cracking, or peeling.
- Alkali resistance (5% NaOH, 1000h): No discoloration or loss of gloss of the paint film, no abnormal phenomena such as blistering, rusting, cracking, or peeling.
- Humidity resistance (500h): No abnormal phenomena such as blistering, rusting, cracking, or peeling.
- Artificial climate aging resistance (300h): No abnormal phenomena such as blistering, rusting, cracking, or peeling.
Core Features of Kunde 145# Marble Mineral Mortar
Kunde 145# Marble Mineral Mortar is made of natural mineral raw materials, has fireproof and impermeable performance, and can be used for indoor and outdoor wall decoration.
- No primer or topcoat required, reducing construction procedures
- Natural and comfortable visual effect
- Impermeable, stain-resistant, and high color retention
The following is the construction instruction for Kunde 145# Marble Mineral Inorganic Mortar, organized in the order of preparation, base treatment, coating construction, and finishing.
Construction Tool Preparation
- Basic Tools: Brushes (select different specifications according to the size of the paint surface), rollers, trays, scrapers, sandpaper (coarse sand, fine sand), masking tape, rags, gloves, masks, etc.
- Special Tools: For large-area spraying, prepare a spray gun and an air compressor; sealant and a caulk gun may be required when treating gaps.
Base Treatment
- Base Cleaning: Use a rag or detergent to remove dust, oil stains, rust, etc. from the surface to be coated to ensure the surface is clean.
- Grinding: Grind the surface with sandpaper to make the surface rough and uniform, so as to enhance the adhesion of the coating; for metal surfaces, remove rust before grinding.
- Repair: For cracks and dents, fill with Moon White or sealant, and grind flat after drying.
- Protection: Use masking tape to cover the areas that do not need to be coated (such as door and window edges, hardware parts).
Coating Construction
Operation Key Points for Different Coating Methods
- Brush Coating: Dip an appropriate amount of coating, apply evenly along one direction, avoid back-and-forth brushing that causes coating accumulation or brush marks; gently outline corners with a brush.
- Roller Coating: Dip the roller in the tray to pick up coating, roll gently to remove excess coating, then apply in a "W" shape, and then smooth horizontally and vertically to make the paint surface uniform.
- Spray Construction: Adjust the spray gun pressure and nozzle size, keep the distance between the spray gun and the surface to be coated at 30-50 cm, move at a constant speed, and avoid local accumulation.
Coating Coats and Intervals
- Generally, 2-3 coats are required. After the first coat is dry (usually 2-4 hours), gently grind with fine sandpaper to remove burrs, clean up dust, and then apply the next coat.
- It is recommended that the coating direction of the subsequent coat is perpendicular to that of the previous coat to ensure a uniform paint surface.
Precautions for Coating Use and Storage
- The original color in the original bottle is Da Vinci 16-color, ready to use after opening, no need to add water.
- Monet 32-color is prepared by mixing Da Vinci 16-color according to the specified ratio. Note that after mixing two colors, it can only be added with skin-feel materials to create the luxury leather series effect; Monet 32-color cannot be used for flat coating.
- The remaining coating after opening the lid should be sealed and stored in a cool and dry place.
Usage Reference
- About 0.08-0.13kg/m² per coat for spraying/roller coating
- Each bottle (1kg) can cover about 4-6m² (for 2 coats of spraying/roller coating)
Project guidance
Find the right material for your wall.
Share your project conditions with us for product and application guidance.
Continue exploring





